Troubleshooting
Black picture, error 401, slow HD, pop-ups not showing, Home Assistant not connecting.
Start with Options › Checks – it usually points straight at the cause.
No picture or a black tile
- Try the stream URL in VLC on a computer.
- With Frigate: without a go2rtc RTSP account there’s no HD, and video falls back to MJPEG. See Frigate.
- If the picture goes black after opening several HD cameras at once, the box’s decoder may be overloaded. Use the SD stream for the grid (the wizard sets this up for you). If the decoder stays stuck, restarting the box helps.
Error 401 / Unauthorized
Wrong username or password, or the account isn’t allowed to view the stream. With Frigate, check the go2rtc RTSP account, not your Frigate login.
HD takes a while
- HD waits for the next keyframe. If the camera’s keyframe interval (GOP / I-frame interval) is long, shorten it, e.g. to 1–2 s.
- Check that your TV has a hardware H.265 decoder (Options › Checks).
Stuttering picture
Turn on Options › Display › Smooth picture. It adds about 0.1 s of latency and evens out the frame cadence.
Pop-ups don’t appear
- You need the Pro edition and a Frigate camera.
- Check the Display over other apps permission for Crow’s Nest.
- Check quiet hours and the camera’s priority (Options › Alerts).
Home Assistant won’t connect
- Check the address and token (the token isn’t your password – create it in your HA profile).
- If you changed the certificate on HA, save the settings again from your phone.
ONVIF doesn’t find cameras
Discovery doesn’t cross VLANs. Add the camera by IP address or via RTSP – see ONVIF.
Updates fail
Allow Crow’s Nest to install unknown apps (Settings › Security & restrictions).
None of the above?
Send a support report with your message.
Still stuck? Contact us · FAQ