Changelog
Release history
The app updates itself, with your confirmation. Here’s everything that has shipped, newest first.
- Modes (Pro): ready-made Day, Night and Away profiles with basic settings (grid layout, pop-up, quiet hours) and an advanced mode that saves the current state, including hidden cameras and priorities; switch with the header button, by the hour or from Home Assistant (alarm or a selection), and the active mode is shown next to the camera count
- Home Assistant pop-ups now also for RTSP cameras without Frigate (smaller stream, software decoder so the hardware one stays with the TV program); the Home Assistant section in Options shows even without a Frigate address
- Available in Pro: a PRO mark in Options (on Free) and a shared screen with a description and purchase (Google Play) or key entry; “This camera’s alerts” is Pro, as it has no effect on Free
- A locked camera (PIN) shows no picture or details in events, the timeline, “While you were away”, the pop-up and the corner camera
- New texts are translated into all 12 languages
- New home screen look: name and connection status (“10 cameras · All connected”), icon buttons (layout, bell with the alert count, options); button names optional in Options › Display
- Camera status only when something is wrong: “Offline” and “Weak stream” in the corner of the tile
- A locked camera (PIN) is a dark grey card with a lock and “Press OK to unlock”; a thinner focus frame with a soft glow
- Events: compact filters under the title (active ones in orange), new All statuses / Unreviewed filter, discreet badges, an orange dot for unreviewed events
- Clips: a loading ring instead of text (it fills up when the size is known)
- Remote keys are orange in all hints (camera OSD, clips, menus)
- Layout button on the home screen (and in quick actions): Automatic, 2×2, 3×3, 4×4, 1+3, 1+5, 1+7 from a list
- Events: pick the type and camera from a list (back to All cameras in one click)
- While you were away: a camera or All events opens only the events since you left; also on demand (long OK on a tile)
- Backup: with a backup password it always includes passwords and the HA token; after restoring, Options show the restored values; a notice when a backup has no passwords
- New languages: Croatian, Bosnian, Slovenian, Spanish, Russian, Ukrainian, Portuguese, Hungarian, Bulgarian and Italian (Options › Display › Language, or Automatic from the TV language); the phone setup page too
- Backup password (Options › Backup): backups are encrypted with AES-256; restoring asks for the password (also on the phone)
- Cloud backups: Google Drive (code at google.com/device) and Dropbox (QR on the phone) – encrypted only, automatic when something changes, restore from Options
- Demo events: 11 samples (alerts and detections with thumbnails), event clip playback, filters, motion labels on tiles and a counter on the Events button
- Demo mode: 9 sample channels from clips inside the app (looped), no cameras or internet – “Try the demo” on the first screen or Options › Cameras › Demo mode
- New layouts 1+3, 1+5 and 1+7: one big HD tile with small ones around (long OK › Make it the big tile)
- Auto-switch: while you watch the app, an event switches to that camera and returns after 15/30/60 s (OK = stay); from the grid it opens the camera and returns
- Alert priority per camera (Custom cameras): off, normal, high
- Camera wizard (Options › Cameras): network search, HD/SD stream check, TV decoder and a one-click layout recommendation
- Recordings by time: new “Timeline” view – a day bar with events, ◀ ▶ cursor, ▲ ▼ zoom (24 h to 10 min), 7 / 9 event, OK plays from the cursor, picture of the nearest event
- Events: filter by object (person, vehicle, animal…) and by zone of the selected camera
- Recordings by time: jump to an event without scrubbing – 9 next, 7 previous, long OK for a list of events
- PTZ cameras: long OK › Control camera – arrows move, CH+/CH− zoom, 1–9 presets (via Frigate)
- Replay the last minute: ◀◀ key or long OK on a camera (also in quick actions) – plays the last minute from the Frigate recording, then back to live
- Motion on tiles: while Frigate tracks a person, car… the tile gets a red frame and a label
- While you were away: when you return after 20+ min, a summary of events per camera and Home Assistant doorbells
- An alert or doorbell wakes the screen and stops the screensaver (Options › Alerts › Wake the screen)
- Long OK on a camera opens a menu: replay, events, recordings by time, rotation
- Watchdog: when the HD stream drops or the picture freezes for 8 s, the camera reconnects by itself (3–30 s); after two failures it switches to the smaller stream; status in the corner
- PIN (Options › Protection): locks Options and phone setup; locked cameras (Custom cameras) show the picture only with the PIN; unlocked for 5 min
- Camera rotation: ▶❚❚ or long OK › Camera rotation – cameras switch every 5/10/30/60 s; changing the channel stops it; pick cameras in Custom cameras
- Grid pages can turn automatically (Options › Display)
- Camera view now says what OK does: “again: statistics” or “hide statistics”
- Camera statistics: INFO or OK twice – source, resolution, codec, decoder, FPS, bitrate, buffer, plus Frigate (camera and detection FPS, link quality, reconnects, detector) and go2rtc clients
- Tile statistics: FPS and a coloured health dot for every camera (INFO on the grid, quick actions or Options › Display)
- Options › System › System status: Frigate version, CPU, detector, GPU, recordings disk, cameras, go2rtc streams and this device
- Number keys now work on the home screen too: 1–9 opens the camera, two-digit channels after a short pause
- New launcher banners; Events and Options buttons readable when focused
- Events and Options buttons readable when focused
- Launcher banners without empty margins on the left and right
- New launcher banners for Crow's Nest and Crow's Nest · Corner
- Recordings at 8× and 16×: key frames only – smooth even for high-resolution cameras (no freezing)
- Recording parts are downloaded in order and sized for the camera (about 60 MB) – no long waits
- Recordings by time without breaks even at 16×: parts are downloaded ahead and chained to the same decoder
- No controls popping up between parts; if it has to wait, just a small label in the corner
- Events: ALERT / DETECTION labels, a check mark for reviewed, large time
- Recordings by time: a bar showing how much of the hour is recorded, red for hours with events
- The phone setup page uses the TV theme colors; pop-up with a gradient
- Options: a section list on the left follows where you are, section icons, version and edition in a badge
- Full-screen camera: new channel display and key hints
- Set up with your phone: QR in a card and numbered steps
- New look: themes (Night, Midnight OLED, Ocean, Forest, Graphite, Lavender) – Options › Display › Theme
- Long OK on a camera: a new side menu (open, events, recordings by time, corner camera, arrange)
- Tiles with a channel badge and gradient, pill buttons in the header, new dialogs
- The corner camera closes by itself when you open Crow's Nest
- A "Corner camera" shortcut for the launcher dock (a separate small app)
- The corner camera closes with a launcher key, from Options or by itself after 5–60 min (long BACK removed – it interfered with the launcher)
- Fixed: a long BACK press now reliably closes the corner camera
- Corner camera from a camera: long BACK (or HOME) – the camera stays in the corner, you go back to what you were watching
- Long BACK anywhere closes the corner camera (enable once in the TV Accessibility settings); it can also close itself after 5–60 min
- Grid quick actions (long OK): Corner camera
- Playback speed also 16× (▲, or key 6)
- Playback speed 1× 2× 4× 8× (▲ ▼ or keys 1, 2, 4, 8), like in Frigate
- Backup on the device and on USB: manual and automatic once a day; restore from Options
- Recordings by time: day and hour for each camera, continuous playback (◀ ▶ 10 s, ▲ ▼ 1 min, CH 10 min)
- Corner camera: a small camera picture always over whatever is playing (launcher key or Home Assistant)
- Backup and transfer of settings to another TV with your phone; support report
- Quiet hours and a warning when a camera stops sending a picture
- Home Assistant: camera in full screen or in the corner (mode: fullscreen / pip)
- Home Assistant: a button in the pop-up (e.g. Open the gate) – → then OK on the remote
- Home Assistant: a doorbell, intercom or any sensor opens a camera over whatever is playing
- Set up with your phone: address, token and rules (entity → camera, title, duration, sound)
- From an automation: the crowsnest_popup event with camera and title
- Alerts › Try it: the pop-up appears after 10 s, so you can start something else
- Hidden cameras have no events or pop-ups; change it in Customize cameras › Events of hidden cameras
- Free: events and the unreviewed counter only for the cameras shown in the grid
- Options › Restore license from server: a TV that was activated before gets its license back without the key
- Per-device license activation: the TV contacts the server once, then works offline
- Without the server the license works for 14 days; checked weekly for revocation
- Free, Pro and Business editions with a license key (activate with your phone or on the TV)
- Free: 4 cameras, 2×2 grid, 24 h of events; Pro unlocks everything, Business is for multiple devices
- Grid layout 2×2, 3×3 or 4×4, with pages (CH+ / CH−, or arrow past the edge)
- Favourite cameras (★ first), custom order, names and hidden cameras
- Long-press OK on a tile: quick actions for that camera
- Channel number on every tile
- Camera sound (AAC and G.711) in full screen; MUTE on the remote toggles it
- Pop-up: when Frigate raises an alert, the camera pops up over TV content
- In the pop-up, OK opens the camera full screen, BACK closes it
- Live video without skips: frames are no longer lost when the decoder is busy
- Smooth live video: even frame pacing on vsync (Display › Smooth picture)
- Event recordings and live video play smoothly: uneven camera timestamps are evened out, frames follow vsync
- Option Display › Smooth picture (about 0.1 s delay; turn off for the lowest latency)
- Frigate events: alerts and detections with thumbnails, by day and camera
- Event recordings on the TV: pause, ±10 s and 1×/2×/4× speed
- Long-press OK on a camera opens its events
- Unreviewed alert count on the Events button
- Fast channel switching: neighbouring cameras are pre-connected, the picture appears instantly
- TV-style channel banner: number, name and clock
- Two-digit channel numbers (e.g. 1 then 2 = channel 12), INFO shows the channel
- Phone setup: scan the QR code and add cameras from your phone
- ONVIF: network search and adding by IP address (also for cameras on another VLAN)
- Main and sub streams are read from the camera automatically
- RTSP login works with Hikvision/Dahua cameras (Digest qop)
- RTSP cameras without Frigate: any IP camera or NVR (Options › Cameras)
- Grid over RTSP sub-streams (Options › Display › Grid)
- Number keys 1–9 and 0 pick a camera directly
- Software decoding when hardware decoders are busy
- Decoder test: how many streams the box can show at once
- Redesigned Options, in Serbian and English
- Checks: server, login, cameras, MJPEG, RTSP and HEVC decoder
- Automatic updates from GitHub, with confirmation
- “What's new” after every update
- Own RTSP player (H.265 and H.264): HD picture in ~2 s instead of 14 s
- Arrow keys work in Options, the keyboard no longer pops up
- HD picture over RTSP when a go2rtc account is set, otherwise MJPEG
- First version: a grid of cameras from a Frigate server and a full-screen camera on Android TV