Crow’s Nest
Docs

ONVIF discovery

Find cameras on your network automatically, or add them by IP address – including on another VLAN.

ONVIF is a standard that lets a camera tell you which streams it has. Crow’s Nest uses it to save you hunting for RTSP URLs.

Automatic discovery

Start a scan from the wizard (Options › Cameras › Camera wizard) or from the phone setup page. Crow’s Nest sends an ONVIF probe on your local network and lists the devices it finds.

Enter a username and password for each camera; the main and sub stream URLs are read from the camera.

Adding by IP address

Automatic discovery only works within the same network segment. If your cameras are on another VLAN or subnet, add them by IP address – that works as long as traffic between the networks is routed.

If a camera isn’t found

  • Make sure ONVIF is enabled on the camera (some ship with it off, or require a separate ONVIF user).
  • Make sure the TV and camera can reach each other (same network, or routing between VLANs).
  • You can always add the camera manually via its RTSP URL.

Still stuck? Contact us · FAQ